Post Reply
User avatar
Michael
Site Admin
Site Admin
Posts: 515
Joined: Sun Nov 21, 2004 12:00 pm
Location: Seattle, WA, USA
Contact:

Fuel Pressure regulator / damper?

Post by Michael »

Guys:
Any recommendations on which brand of FPR to use? I assume I need a 3 bar FPR - probably an adjustable one?

This is for a Glenwood 24v engine running Gotech Pro with GTA injectors.

Thanks,
Michael
1981 GTV6
User avatar
Barry
Verde
Verde
Posts: 1995
Joined: Sat Nov 27, 2004 1:21 am

Post by Barry »

Mike,run the std Alfa (bosch)fpr....Gta injectors are big and will work at std fuel press..

Traced bracket..goeie ou poskantoor..will mail you..
French cars are shit and shit expensive to service and bloody awful and unreliable and expensive and friends don't let friends drive french cars and you wait years for parts.
User avatar
ar4me
Verde
Verde
Posts: 645
Joined: Fri Dec 03, 2004 9:55 am
Location: Southern California

Post by ar4me »

Michael,
We used the 3.7 setup on my 3.2 GTA (which we incidently just finished this past weekend with dyno tuning Friday and Saturday - I trailered it down this Sunday/Monday - it made 246 SAE RWHP). It is an adjustable fuel pressure regulator that I got from Jeg's - threaded a little pressure gauge into the regulator. That way you can always read the fuel pressure, making engine debugging a bit simpler. I can post a pic later tonight if you like.
Jes
87 Milano Verde - daily driver - Juliet
87 Milano 3.0 Motronic - budget race car - Roxanne
87 Milano 3.7 24v - race car
(Repeat or do as I say at your own risk - be critical)
Post Reply