Merry Christmas to all,
I am using the original Alfa coil packs on my V6 Busso.Firing order 1-4-2-5-3-6
Does anyone know how I can check if this firing order is programmed in my Gotech Pro X.
Re: Gotech Pro X
I’m also running same ecu on my 24v . There are loads of base maps for that engine for tbe gotech pro x. Are you running cam angle sensor ?
Re: Gotech Pro X
Hi Kevin,
No ,I was told I don't need to,it runs 3 ignition batch phases under mode 4.
I have just wired it up and when I try to start the engine it back fires and won't start.
Do you know how the firing order is programmed .
Firing order on the Busso
1-4-2-5-3-6
No ,I was told I don't need to,it runs 3 ignition batch phases under mode 4.
I have just wired it up and when I try to start the engine it back fires and won't start.
Do you know how the firing order is programmed .
Firing order on the Busso
1-4-2-5-3-6
Re: Gotech Pro X
Firing order is all pre programmed. I’m not running can angle sensors either . I think you’re on throttle bodies your map will be different to mine . This will start your car
- Attachments
-
- 1337CBB9-52C4-4ADC-BE47-CBB91DAFEA09.jpeg (85.68 KiB) Viewed 1063 times
-
- 0C95135B-0ED3-4C85-8894-D6FCDDDD925D.jpeg (116.06 KiB) Viewed 1063 times
-
- 43E2FD05-677B-466B-92C3-893A122EFB8B.jpeg (122.58 KiB) Viewed 1063 times
Re: Gotech Pro X
Hi Kevin,
These are my settings ,
My TPS is now 4.9
Can you see any of my settings that are inc and won't let my engine start?
These are my settings ,
My TPS is now 4.9
Can you see any of my settings that are inc and won't let my engine start?
- Attachments
-
- IMG_E8026.jpg (100.82 KiB) Viewed 1059 times
-
- IMG_E8027.jpg (109.41 KiB) Viewed 1059 times
Re: Gotech Pro X
To change the setting is a bit hard , I need to Know which keys to press. 
Re: Gotech Pro X
I downloaded the whole manual . Also there is a help menu once you’re switched on . I know a few guys who really good with this but they are on holiday at the moment .
See this link as it all should be here
https://powermods.co.za/Pages/Downloads.asp
See this link as it all should be here
https://powermods.co.za/Pages/Downloads.asp
Re: Gotech Pro X
Pages 1-5
- Attachments
-
- 5BF8DAA9-091B-44D9-9CED-8A4B46B63BDF.jpeg (86.9 KiB) Viewed 1043 times
-
- E2E607D4-F1D9-4B4F-8F62-73BFF9F09C75.jpeg (83.1 KiB) Viewed 1043 times
-
- 7E4046C3-0A22-425E-A19F-6263F2907DAB.jpeg (98.47 KiB) Viewed 1043 times
-
- 30867E10-C3D3-432B-82C3-DFC51E73867A.jpeg (95.67 KiB) Viewed 1043 times
-
- 0F0DDA5D-9D7D-4460-9B49-46DCF074BF96.jpeg (103.55 KiB) Viewed 1043 times
Re: Gotech Pro X
Pages 6-10
- Attachments
-
- 4795034D-3B92-4264-9D2D-20A4E82DDE8D.jpeg (103.21 KiB) Viewed 1043 times
-
- F99CD30D-E017-41FC-B990-CADA33FB7E1B.jpeg (95.34 KiB) Viewed 1043 times
-
- DF31AD18-D738-406A-84D2-9A2CCD7C5C0C.jpeg (100.45 KiB) Viewed 1043 times
-
- BCDD94BA-6874-4D4B-8464-BE2E0EF94F26.jpeg (81.01 KiB) Viewed 1043 times
-
- 7E890353-03CA-4748-8372-7C384D4FE9BE.jpeg (95.7 KiB) Viewed 1043 times
Re: Gotech Pro X
Pages 11-15
- Attachments
-
- 0DCE7F9A-DF73-490E-9AFA-22725081D5F4.jpeg (95.7 KiB) Viewed 1042 times
-
- 0CFDFFEA-F6F4-4ADC-80D2-B8A030BB57AE.jpeg (105.06 KiB) Viewed 1042 times
-
- ABCAF911-C184-4CA4-BA63-7AA8FCB9777A.jpeg (93.76 KiB) Viewed 1042 times
-
- 8BC63060-65E9-436F-A665-AAA698A2A934.jpeg (102.52 KiB) Viewed 1042 times
-
- FD0047F5-39BE-4BD3-BC66-4A78BE7B1628.jpeg (109.23 KiB) Viewed 1042 times
Re: Gotech Pro X
Pages 16-20
- Attachments
-
- 74F5ECDE-0F6D-485C-810D-0C028EAF23FE.jpeg (90.6 KiB) Viewed 1042 times
-
- B29F6939-62B0-4C11-9FA7-2ABA44184412.jpeg (89.29 KiB) Viewed 1042 times
-
- A463748F-1FEF-400D-B44D-85929A64EBCF.jpeg (98.56 KiB) Viewed 1042 times
-
- 77A0A46A-5A7D-4CD0-95E1-1DB08479A413.jpeg (91.85 KiB) Viewed 1042 times
-
- E969710C-20A9-4C83-AA2D-439AD1A36493.jpeg (75.39 KiB) Viewed 1042 times
Re: Gotech Pro X
Last pages
- Attachments
-
- 8D629932-BDD8-429B-875C-3B72368EA708.jpeg (103.62 KiB) Viewed 1042 times
-
- D51D69F8-DCEC-4305-9CD8-B214120828E3.jpeg (100.56 KiB) Viewed 1042 times
-
- BC7893E7-6066-45F8-8A7B-75AA39F5599B.jpeg (82.97 KiB) Viewed 1042 times
-
- C1681ADE-81E4-4AD2-B9F4-1A3956335BCF.jpeg (84.06 KiB) Viewed 1042 times
Re: Gotech Pro X
Hi Kevin,
Thank you for the manual its going to help. Fantastic
Would you have photos of your mapping for the fuel and ignition.EG refer photo attached
I have fuel at 55 PSI going to the injectors but when I crank the motor it seems the injectors are not spraying.
Electrical to the injectors are correct.
I think the programming mapping on the ECU is incorrect.
Thank you for the manual its going to help. Fantastic
Would you have photos of your mapping for the fuel and ignition.EG refer photo attached
I have fuel at 55 PSI going to the injectors but when I crank the motor it seems the injectors are not spraying.
Electrical to the injectors are correct.
I think the programming mapping on the ECU is incorrect.
- Attachments
-
- Screen Shot 2022-12-28 at 8.05.27 am.png (125.96 KiB) Viewed 1017 times
Re: Gotech Pro X
Got the engine running ,
Just got to work out the idle on the Gotech Pro X ,
Will have to adjust the throttle positioning sensor.
Any advice would be great.
, Just got to work out the idle on the Gotech Pro X ,
Will have to adjust the throttle positioning sensor.
Any advice would be great.
Re: Gotech Pro X
Hi Kevin.
Could you please show me your settings on your mapping graph on the fuel and ignition on your car ,
My snap shot shows 2.44MS and yours shows 0.17MS.
My engine is running so rich and its back firing at times.
I think my settings are too rich.
I cannot take the GTV to a dyno yet.
I just want to get the engine tune to an acceptable level so I can drive the car.
Could you please show me your settings on your mapping graph on the fuel and ignition on your car ,
My snap shot shows 2.44MS and yours shows 0.17MS.
My engine is running so rich and its back firing at times.
I think my settings are too rich.
I cannot take the GTV to a dyno yet.
I just want to get the engine tune to an acceptable level so I can drive the car.