Page 1 of 2
Gotech Maps upload/download location
Posted: Thu Aug 25, 2005 11:45 pm
by Michael
Post your Gotech map files in this location.
What file extension types are needed for Gotech? Let me know and I'll allow uploading of those types.
Post files as .txt files in the interim.... example myGotechMap.gtc.txt
Please list specifics on your car with each file upload, in the message body or file description.
Thanks,
Posted: Fri Aug 26, 2005 2:53 am
by SamW
This is the stock map that came with my GT unit, this is sort of for test purposes to see if this works, thanks for doing this Michael!
Whoops, .dfi is the extension, I am going to avoid loading it as a test file, I had problems with that the first time JJ & Jes sent me a map.
Posted: Fri Aug 26, 2005 5:26 pm
by Michael
No worries - I have added .dfi as an allowable extension.
Posted: Tue Sep 27, 2005 3:59 am
by 4agedub
alfa 156 gta, relatively std, 6 cylinder
Posted: Tue Sep 27, 2005 4:20 am
by 4agedub
alfa 156 gta, relatively std, 6 cylinder
Posted: Fri Feb 24, 2006 4:18 am
by SamW
Here is one that is pretty good for a stock 3.0 in a warm climate...
Posted: Fri Dec 22, 2006 5:54 am
by SamW
Here is my latest, might be a bit too rich at start up or I might just have too much advance at start up.
246 3.5litre 12v Engine
Posted: Thu May 24, 2007 9:23 am
by JT
Engine Spec:
3.5 litre Alfa Romeo V6 engine, using your 3.0 litre donor motor.
100mm forged Ross pistons.
Fully balanced crankshaft, conrods, pistons, pulley & flywheel.
Lightened flywheel.
New bearings throughout.
Custom ground 10.8mm lift camshafts.
Fully ported & gas flowed cylinder heads.
46mm I.D. intake runners, gas flowed, heads machined to match.
Modified head gaskets featuring Wills rings to seal cylinders.
Hi-Flow fuel injectors from later type 164 engine.
Valve seats 3 angle cut, valves cut to match.
CSC tubular exhaust manifolds.
Gotech MFI Pro stand alone programmable engine management system.
Custom made air intake system to remove air flow metre & allow better breathing.
Posted: Tue Nov 13, 2007 2:19 pm
by rz
can somebody supply me a mapping for the 3,7 engine with gotech on sea level?PLEASE
Posted: Thu Nov 22, 2007 4:19 am
by Rookie ROX
Someone have a Pro map for a stock 2.5?
I've had a search and can only locate 3.0 maps.
ROCK ON
R~R
Posted: Thu Nov 22, 2007 4:56 pm
by junglejustice
You guys should also list your GoTech models please! Generationally there are subtle differences between the Standard, the Pro and the new Pro-X which preclude file-sharing of the maps...
Posted: Fri Nov 23, 2007 8:13 am
by rz
i hope barry will suply you with an answer?
Posted: Fri Nov 23, 2007 8:13 am
by rz
again double posting
Posted: Fri Nov 23, 2007 1:26 pm
by junglejustice
Hey Bud!
For a Pro or for a Pro-X...?
6 Standard Alfa/Bosch COPs or a 6-pack brick of 3 x double coils (either way - you just need to change that setting in the setup screen however, we still need to be specific - Pro or Pro-X?)
Posted: Mon Jun 02, 2008 11:33 pm
by fastcar
4agedub wrote:alfa 156 gta, relatively std, 6 cylinder
Hi 4agedub,
Is it for a PRO v5 unit?
I just received the unit last evening and I would like to install it during the weekend. But it would be great if I should have a good base which one I can fine tune to my readings.
Thanx in advance,
fastcar