ALFAGTV6.COM

[KevinR]

Theo and I got a few hours in to fit the rear seat belt bar, seat belts and seats. As the Safety Devices roll cage is a basic it dose not have any seat belt bars. Following the MSA rules on seat belt angles the shoulder belts must be with 15 degrees of shoulder strap holes in seats. Good thing the GTV has already four chassis mounting holes under the rear parcel shelf. A little bit of welding and Powdercoating and some slices into the backboard it can all be fitted to be just above the rear seats which had to go back in. Note this is not a full track day day stripped out car ………. Yet !
Coffee in the Classic Alfa mugs and Biltong always on hand during work .

[KevinR]

Some good quality seat belts fitted. For MOT purposes even though not needed on this age car we fitted Race Safety Accessories Seat Runner Kit with light weight Alloy Seat Side Mounts.

[KevinR]

Time to test the car out in around the farms in Bosham , West Sussex . Thanks to Brian Cheung for snapping the pics

[Zamani]

Kev,

What headlights does this car have? Looks nice, and possibly…bright?

Z

[MD]

I reckon those lights are even brighter than Kevin..

[KevinR]

MD, that’s why there are four of them.
Z I’m not sure but it’s in the previous owners build which I will dig up.

[MD]

Hey Kev,
Is that a UK registration number plate standard issue or have you ordered that as an advertising billboard ?
Cripes, why are they so large ? Lot of parking attendants in the UK must need reading glasses I guess. Neil Armstrong could read that from the moon.
It takes up way too much airflow space.

...anyhow you seem to be having too much fun here so I thought I might put the handbrake on ...I'm jealous.

[KevinR]

MD, the uk plate’s absolutely deface the car . Nothing we can do . I guess it’s so they can get you on laser from 800yards away .
We could get them stuck on the nose panel . Maybe that’s an option.
This car is fun but a long way from its final engine modification or should I say swap .

[KevinR]

MD , thinking putting the Reg on the nose panel and see how that looks .
Some more testing today . Need to put Lambda bung in exhaust so can put the PLx unit it in.