Does anyone have drawing of adapter brackets for GTA or 166v6 calipers? -It would help to do conversion a lot faster...
Thanks in advance.
![Cool 8)](./images/smilies/icon_cool.gif)
Edit: Some pics...
![Image](http://i41.tinypic.com/23mos9t.jpg)
![Image](http://i44.tinypic.com/qzhoyc.jpg)
Bought everything but didn't started working on it...Doc.Alfa wrote:Have you made the adapter brackets, i need a set to!!
Can you make a set more??
Søren
Denmark
Daniel is currently creating a model of my 166 calipers in solidworks as an alternative to the GTA calipers that are proving annoying due to their narrow bolt spacing clashing with the upright with the 305mm discs... CNC brackets shouldn't be too big a step from theregaborb wrote:I went through this topic and haven't really found exact info about material should be used for caliper brackets. So what would you suggest? Setup will be 156 GTA 305mm disk + 4pot Brembo calipers from 166 V6.
thanks,
gabor
I was checking this weekend how the Alfa 166 caliper would fit. Hmmm, not quite...la_strega_nera wrote:Daniel is currently creating a model of my 166 calipers in solidworks as an alternative to the GTA calipers that are proving annoying due to their narrow bolt spacing clashing with the upright with the 305mm discs... CNC brackets shouldn't be too big a step from theregaborb wrote:I went through this topic and haven't really found exact info about material should be used for caliper brackets. So what would you suggest? Setup will be 156 GTA 305mm disk + 4pot Brembo calipers from 166 V6.
thanks,
gabor
His new Porsche 928S4 with VE comodore rotor setup looks pretty good: