Page 1 of 1
Master Cylinder grommet/seal
Posted: Sun Aug 06, 2006 1:01 am
by Zamani
Guys,
The seal or grommet between the MC and the brake fluid reservoir. Mine are bad. The one to get, is it the same as those in the BMW MC? Like from a E30 325i or E34 535i?
Posted: Sun Aug 06, 2006 2:10 am
by Mats
I bet all Girling MCs have the same and all ATE have the same (from the time period in question), but that is just a guess.
Posted: Sun Aug 06, 2006 3:49 am
by Barry
Z,No..Bmw have some with small Id and others with large Id`s..The Od`s are usually close...
Posted: Sun Aug 06, 2006 5:23 am
by ALFA GTV6 GP
Hi Zamani you mean these?
Ebay australia item number 8048367962.
Thanks John
Posted: Sun Aug 06, 2006 3:15 pm
by Zamani
GTV6GP,
Yeah that's the one mate.
The price here is $8/pc . That's nuts. The BMW ones are $3.XX/pc.
Bazza,
I measured the Alfa one as 17mm OD and 10mm ID (roughly). Most BMW/VW ones are listed as 22mm/12mm which won't fit. From what car should I get it from you think? If not, heck I'll just pay the $16 for the 2 miserable grommets.