ALFAGTV6.COM

Posted: **Mon Apr 09, 2007 7:13 am**

Just wanted a confirmation on this as my GTV6 master cylinder needs replacement.

From what I understand, the GTV6 master cylinder is 22mm, and the 164 is 24mm. That should provide shorter peddel travel and likely greater feel at the cost of higher leg pressure (not a problem in my view).

Are the two the same regarding mounting and peddel/pushrod interface/length such that the 164 unit is a direct replacement ?

Thanks,
Merril

Posted: **Mon Apr 09, 2007 9:12 am**

On the button there Merril.....

Posted: **Mon Apr 09, 2007 6:08 pm**

Baz,

I think the 164 MC is slightly longer. I have it on my 75 and one of my hard brake lines had to be extended just a little bit.

Posted: **Mon Apr 09, 2007 8:49 pm**

Zman,Things like that are negligible to me..bend the pipe further then..Hell,Im worried when you guys have to start fitting ISUZU pickup cylinders to our cars..

Posted: **Tue Apr 10, 2007 4:21 pm**

Thanks for the input guys. Barry, I see you were quick with a response! I should have checked the Forum sooner. I have a club meeting tonight so I'll see about poping the hood on a 164. But a slight brake line mod shouldn't be too big a deal.
Thanks again,
Merril

ALFAGTV6.COM

164 Brake Master Cylinder Interchangable w/GTV6 Master ?

164 Brake Master Cylinder Interchangable w/GTV6 Master ?