Post Reply
User avatar
AlfaTipo
Gold
Gold
Posts: 70
Joined: Tue Nov 30, 2004 7:04 pm
Location: Portland, Oregon
Contact:

GTV6 Pedal Box Rebuild

Post by AlfaTipo »

Sorry if this turns up twice. I thought I sent it but it has not appeared yet.

I have the pedal box out as the booster died. Got a Milano replacement.

I would really like to replalce the plastic spacer between the brake and clutch pedals as there is a lot of slop compared to the Milano pedal box that came with the booster.

Problem is the roll pin that secures the pedal beam. How the heck is it removed? Heat and tugging on it?

I can probably get a thin drill down through the center of the pin and drill through the box, open up the resulting hole and press the pin all the way through.

Any thoughts?
Jef
85 GTV6 'Gina G2' Shankle cams and headers Resting Serious rebuild in the future
85 GTV6 'Gina G3' Sold but missed.
www.motozane.com
Post Reply