Page 4 of 6
Posted: Thu Jun 14, 2007 8:28 pm
by Barry
The angle of the bends if I can remember correctly is 134 deg..This data is all captured in the nc bending machine..
Garth,yes,small diameter ports,small runners(std 2.5l)and std. plenum..
I learnt a lot from the Maserati Ghibli engine I did..
As for the t/b ,its way big enough for any motor..There are other restrictions that can be looked at before the t/b becomes a problem..
Posted: Thu Jun 14, 2007 11:20 pm
by Fernando
Garth you will find a pic under the OTHER section then under 3.6 24V.
Posted: Fri Jun 15, 2007 12:15 am
by Mats
Barry wrote:The angle of the bends if I can remember correctly is 134 deg..This data is all captured in the nc bending machine..
Garth,yes,small diameter ports,small runners(std 2.5l)and std. plenum..
I learnt a lot from the Maserati Ghibli engine I did..
As for the t/b ,its way big enough for any motor..There are other restrictions that can be looked at before the t/b becomes a problem..
Bends of the runners? Any reason for them not being 30* or 150* depending on how you look at it. 60/2=30.
Isn't that injector plate thing parallell?
Posted: Fri Jun 15, 2007 12:39 am
by GarthW
Yep Fern checked out pic, thankyou. Very nice work done
on your car
Cheers for that Barry, what other restrictions roughly are
there before Plenum becomes a problem.?
Great stuff with the 2 Plenums joined together.
Going wider instead of higher is the way to go for sure.
Posted: Mon Jun 18, 2007 8:49 am
by Barry
This gives a good idea of the finished runner..
Posted: Mon Jun 18, 2007 8:50 am
by Barry
This makes posting pics a pain in the ass..
Posted: Mon Jun 18, 2007 8:51 am
by Barry
OW!! *pinch*
Posted: Mon Jun 18, 2007 10:37 am
by Zamani
Barry,
Please PM me!!!!
Posted: Mon Jun 18, 2007 9:45 pm
by Greg Gordon
I don't think Barry's PMs are working.
Posted: Tue Jun 19, 2007 9:00 am
by Barry
Greg Gordon wrote:I don't think Barry's PMs are working.
Huh??Greg,Did your friend not get my brake reply?Mail me please-Barry at vodamail.co.za.
Zman,Mailed you from another service provider..
Edit: Greg,replied to Joe on the 10th.just forwarded the mail to you as well..Let me know please.Barry
Posted: Tue Jun 19, 2007 10:33 am
by Zamani
Bazza,
Did not get your email. Have you tried using a web mail account instead of vodamail? I think a yahoo account would work well. xenithoman at yahoo.com
Posted: Tue Jun 19, 2007 9:14 pm
by rz
i almost never get his emails either
Posted: Tue Jun 19, 2007 10:10 pm
by Mats
I have tried to email about 20 times but they always come back as undeliverable.
Gmail rocks btw.
Posted: Wed Jun 20, 2007 8:42 am
by Barry
Damn!!
Ok,My e-mail addresses:
Barry at vodamail.co.za
Alfaengines at gmail.com
ztech at absamail.co.za
dag.anderson at gmail.com
My apologies to all whom Ive never returned mails to..Sorry guys,Im unaware of them!
Posted: Wed Jun 20, 2007 3:54 pm
by Zamani
B,
I will use alfaengines AT gmail . kom
Who is this dag.anderson ? Is that your evil twin?