Page 8 of 8
Re: 166 24v into 116 GTV
Posted: Wed Dec 19, 2018 9:30 am
by KevinR
I started some more work on the adaptor. I need to tap the thread into it and Loctite the thread “tube “ in .One can see the threaded section as cerrated edges for it to bite into the aluminium . Also need to drill the recess for the head of the cap screw.
Re: 166 24v into 116 GTV
Posted: Wed Jan 02, 2019 9:14 am
by PietereQ
Those are really nice looking adapter plates Kevin!
Guys, I'm wondering does anyone here have cad drawings of the exhaust flanges for the 3.0/3.2 24V? My engine came without the exhaust headers, and I'm having problems sourcing original ones to copy the dimensions from.
Re: 166 24v into 116 GTV
Posted: Wed Jan 02, 2019 10:08 am
by KevinR
I have some spare laser cut flanges for 24v plus the flanges where they join the down pipes . Drop me pm
Re: 166 24v into 116 GTV
Posted: Wed Jan 02, 2019 11:16 am
by Giuliettaevo2
If you would like you can have a set of 24v 164 headers from me. For free.
First good deed of this year.
Re: 166 24v into 116 GTV
Posted: Thu Jan 03, 2019 2:35 am
by Davo
Hey Kevin - did you fabricate the threaded tubes yourself or are they available somewhere “off the shelf” by chance??
Considering how slowly my build is progressing I could do with an easy addition to the parts bin
Cheers
Re: 166 24v into 116 GTV
Posted: Fri Jan 04, 2019 3:26 am
by PietereQ
Hey guys thanks for the offers!
Kevin, sent you a PM.
Re: 166 24v into 116 GTV
Posted: Thu May 30, 2019 12:44 am
by KevinR
This is the trigger wheel which presses onto the pulley wheel and bolts for extra safety . If pulley wheel is in good condition there are no problems on distortion of Rubber inside . The pick bracket is bolt on and adjustable. It does have webs for extra strength but adding more ( belts and braces) as any movement or vibration leads to bad signal .