Post Reply
m4ff3w
Silver
Silver
Posts: 9
Joined: Thu Nov 05, 2009 8:42 am

Exhaust Manifold flange - anyone have a drawing?

Post by m4ff3w »

Anyone have a dimensional drawing of a 12v V6 exhaust flange?

Thanks!
Top
Greg Gordon
Verde
Verde
Posts: 1552
Joined: Mon Nov 29, 2004 7:06 pm

Re: Exhaust Manifold flange - anyone have a drawing?

Post by Greg Gordon »

My machinist does, I have flanges in 304 stainless, or cheaper materiel if needed.

Greg Gordon,
www.hiperformancestore.com
www.okinjectors.com
Top
gtv-racer
Platinum
Platinum
Posts: 256
Joined: Tue May 12, 2009 12:02 pm

Re: Exhaust Manifold flange - anyone have a drawing?

Post by gtv-racer »

Here's a dxf file i made. When welded up the manifold you have to cut it with a grinder so the flange can expand. the cuts has to be made between the oulet ports.
Top
gtv-racer
Platinum
Platinum
Posts: 256
Joined: Tue May 12, 2009 12:02 pm

Re: Exhaust Manifold flange - anyone have a drawing?

Post by gtv-racer »

gtv-racer wrote:Here's a dxf file i made. When welded up the manifold you have to cut it with a grinder so the flange can expand. the cuts has to be made between the oulet ports.
Edit: Somehow i can't get the file online. Pm me and give me your e-mail and ill post it to you
Top
Post Reply

Return to “Performance”