Page 1 of 1
Exhaust Manifold flange - anyone have a drawing?
Posted: Tue Aug 31, 2010 7:45 pm
by m4ff3w
Anyone have a dimensional drawing of a 12v V6 exhaust flange?
Thanks!
Re: Exhaust Manifold flange - anyone have a drawing?
Posted: Wed Sep 01, 2010 9:40 pm
by Greg Gordon
My machinist does, I have flanges in 304 stainless, or cheaper materiel if needed.
Greg Gordon,
www.hiperformancestore.com
www.okinjectors.com
Re: Exhaust Manifold flange - anyone have a drawing?
Posted: Thu Sep 02, 2010 2:39 pm
by gtv-racer
Here's a dxf file i made. When welded up the manifold you have to cut it with a grinder so the flange can expand. the cuts has to be made between the oulet ports.
Re: Exhaust Manifold flange - anyone have a drawing?
Posted: Thu Sep 02, 2010 2:43 pm
by gtv-racer
gtv-racer wrote:Here's a dxf file i made. When welded up the manifold you have to cut it with a grinder so the flange can expand. the cuts has to be made between the oulet ports.
Edit: Somehow i can't get the file online. Pm me and give me your e-mail and ill post it to you