Post Reply
User avatar
Alfaaa1
Gold
Gold
Posts: 106
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

alternator charge cable

Post by Alfaaa1 »

Hi to all.
On the Alfetta GTV 4 cylinder series.
Just confirming, the charge cable wire on the alternator goes to the starter motor positive post the same one that the battery positive cable sits on. :?:

I am starting to re wire the engine harness to suit the v6. :)

Has anyone fitted a Gotech Pro x stand alone ECU to there V6 with the original coil packs.

This is the year that I will have this project finished .

Thanks
Attachments
IMG_5989 (1).jpg
IMG_5989 (1).jpg (98.62 KiB) Viewed 1161 times
IMG_2456 (1).jpg
IMG_2456 (1).jpg (156.53 KiB) Viewed 1161 times
User avatar
MD
Verde
Verde
Posts: 2472
Joined: Mon Nov 22, 2004 2:37 am
Location: Brisbane, Australia
Contact:

Re: alternator charge cable

Post by MD »

Very nice progress.
The B+ output from the alternator can go almost anywhere where there is a B+ connection. However due to the fairly high current that may be produced by the alternator, it is generally connected where there is high current carrying wiring already ie. the starter B+ connection. Particularly so, if the battery is in the boot (trunk).
Transaxle Alfas Haul More Arse
User avatar
Alfaaa1
Gold
Gold
Posts: 106
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: alternator charge cable

Post by Alfaaa1 »

Thank you MD.
:)
Post Reply