Post Reply
Ivan Boshoff
Silver
Silver
Posts: 3
Joined: Mon Jan 12, 2015 9:00 pm

GTV6 rebuild

Post by Ivan Boshoff »

I have slowly been rebuilding a 1982 GTV6 over the last few years, I am now at the point where I am sorting the electrics. I am currently trying to hook up the power module for the injection system and distributor, unfortunately this was not labelled when disconnected and am now struggling to find what wires go where as the six connecting points are not numbered the wiring diagram does not show numbers on the module either.

Cheers
Ivan
kevin
Verde
Verde
Posts: 2762
Joined: Sat Jan 22, 2005 9:09 am
Location: Esher, UK

Re: GTV6 rebuild

Post by kevin »

Hi Ivan , the light was not good when I took this pic but it might help . My car is in storage but I'm sure some else might have a pic of this .
Attachments
image.jpg
image.jpg (195.64 KiB) Viewed 4648 times
Ivan Boshoff
Silver
Silver
Posts: 3
Joined: Mon Jan 12, 2015 9:00 pm

Re: GTV6 rebuild

Post by Ivan Boshoff »

Hi Kevin, thanks for the pic, the part i am struggling with is the Bosch module next to the coil, as the bottom where the wiring goes in is not numbered and on the wiring diagram it does show numbers but not which is top or bottom however the wiring that you sent me of coil and distributor has helped.
Cheers Ivan
Ivan Boshoff
Silver
Silver
Posts: 3
Joined: Mon Jan 12, 2015 9:00 pm

Re: GTV6 rebuild

Post by Ivan Boshoff »

I have replaced the ignition module and still no fuel to injectors and no spark, what to look for next ?
Post Reply