Page 1 of 1

COLD START WOES

Posted: Mon Oct 24, 2005 7:47 pm
by alfaprince
Cold start injector is not putting out. I have replaced everything thermotime switch tried several injectors, checked all wiring and still no go. The injector shoots if I connect one of the main 6 injector plugs. Could this be a O2 sensor failure? AFM? Throttle switch? Temp sensor? Let me know thanks, Ciao.

Posted: Tue Oct 25, 2005 2:53 am
by SamW
It really is just the the thermo time switch and the cold start injector that operate that system, my guess would be a bad connector on either the switch or the injector, there are a few tests out there for the wiring. I know a friend went through this and it ended up being a connector. Good luck.