Clutch plate refurbishment
Posted: Fri Jul 15, 2016 4:40 am
Anybody know where I can have my clutch (2.5)plates refurbish in S.A. Gauteng area. Every think is still in good condition, just one of the linings decided to come adrift. 
Norbrake in Benoni did mine , but must check the have correct thickness . When you bolt it up if the rivet on the pressure plate is flush then your clutch won't release . However if you can get correct thickness lining then you can skim the intermediate plate by the difference .
I will check what new plate thicknesses are in my file . Kev strapp should also be able to help you out .