Aftermarket Flywheel and clutch
Has anyone purchased an aftermarket flywheel or lightened theirs? Just wondering if you had any problems.... Also how about a single plate clutch sys...
- junglejustice
- Verde
- Posts: 624
- Joined: Fri Nov 26, 2004 1:19 am
- Location: Granolaville, WA
We dropped close to 11 pounds from the front flywheels (44% or so) and 1.5 pounds from the back flywheels (about 16%) - 9 down to 7.5 pounds...
Race clutches are supposed to be "not too grabby" - We'll see...
Andrew Garcia in Houston did the work for us on the rear units. He then balanced that "top" looking clutch unit as a whole.
Dawie's machine shop in SA did the fronts and balanced them for us with the new internal engine parts....
Drive shafts are being balanced as separate units.
Race clutches are supposed to be "not too grabby" - We'll see...
Andrew Garcia in Houston did the work for us on the rear units. He then balanced that "top" looking clutch unit as a whole.
Dawie's machine shop in SA did the fronts and balanced them for us with the new internal engine parts....
Drive shafts are being balanced as separate units.
...to Alfa, or not to Alfa? That is the question...