User avatar
75evo
Verde
Verde
Posts: 944
Joined: Tue Oct 11, 2005 8:56 am

Re: Busso V6 3.2 24v Coil Pack

Post by 75evo »

User avatar
75evo
Verde
Verde
Posts: 944
Joined: Tue Oct 11, 2005 8:56 am

Re: Busso V6 3.2 24v Coil Pack

Post by 75evo »

CDI hooked up to SM3. Thanks to Joe Beninca for answering all my questions.

https://youtu.be/ytQfD9dq7LI
User avatar
Alfaaa1
Gold
Gold
Posts: 121
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Busso V6 3.2 24v Coil Pack

Post by Alfaaa1 »

More info on the coil pack wiring. :D
Attachments
Screen Shot 2019-10-04 at 10.11.26 am.png
Screen Shot 2019-10-04 at 10.11.26 am.png (170.19 KiB) Viewed 7189 times
User avatar
Alfaaa1
Gold
Gold
Posts: 121
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Busso V6 3.2 24v Coil Pack

Post by Alfaaa1 »

Hi, Just if someone can help and confirm,
On the original Busso 24v engines coil pack,
This is what I have worked out on the 3 pin electrical circuit.
Attachments
Screen Shot 2020-08-13 at 7.54.30 am.png
Screen Shot 2020-08-13 at 7.54.30 am.png (120.83 KiB) Viewed 6216 times
User avatar
75evo
Verde
Verde
Posts: 944
Joined: Tue Oct 11, 2005 8:56 am

Re: Busso V6 3.2 24v Coil Pack

Post by 75evo »

As per Beninca
Attachments
image2.jpeg
image2.jpeg (20.06 KiB) Viewed 6209 times
User avatar
Steve R
Platinum
Platinum
Posts: 237
Joined: Wed Nov 24, 2004 1:06 pm
Location: Dorset UK

Re: Busso V6 3.2 24v Coil Pack

Post by Steve R »

Alfaaa1, your hand drawing is correct for the factory wiring. Trigger goes to one of the 6 ignitor transitors within ECU, centre is earthed to the head (or wherever you ground it), 3rd pin is fused 12v and only on when ignition is on.

Can't comment on CDI !
83' GTV6, 3.0 24v supercharged
User avatar
Alfaaa1
Gold
Gold
Posts: 121
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Busso V6 3.2 24v Coil Pack

Post by Alfaaa1 »

Thank you 75evo and Steve R. :D

Will wire up my Gotech Pro X ECU soon.
105gta.
Gold
Gold
Posts: 72
Joined: Fri Oct 23, 2015 4:15 am

Re: Busso V6 3.2 24v Coil Pack

Post by 105gta. »

Alfaaa1, both SteveR and 75evo are correct. You original drawing is capote the for what you want. (Transistor type ignition, controlled by the ecu) evo75’s drawing is also correct in that with a Cdi you reverse the polarity from the Cdi into to the coil. But you’ll notice in his drawing the positive of the coil goes to the neg of the Cdi. Which also correlated to your first drawing of the orientation of the pins. Yes the centre pin is direct to earth.
User avatar
Alfaaa1
Gold
Gold
Posts: 121
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Busso V6 3.2 24v Coil Pack

Post by Alfaaa1 »

Thank you 105gta.
Will wire up soon , see how I go.
Regards
User avatar
Alfaaa1
Gold
Gold
Posts: 121
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Busso V6 3.2 24v Coil Pack

Post by Alfaaa1 »

Hi to all,
At last I am coming close to finishing the GTV 3.2.
I am fitting the Gotech Pro X stand alone ECU.
Have been advised on the coil packs to only use the 2 pin that have a restintance 1ohm which are the outer pins straight 12+ power and ECU.

:D
Attachments
IMG_E7916.jpg
IMG_E7916.jpg (171.09 KiB) Viewed 1920 times
Post Reply