Air Flow Meter Adjustment
Gimme the skinny, I put on the large bore Bosch AFM with the L-jet and need the real deal on adjusting spring tension. Now, I`ve tried Harris` idea on the voltage coming off of the O2 sensor and cannot seem to make a difference with this. Is it possible to use a lean-drop technique or a maximum idle to get this thing dialed in. Seems to be running rich? Please reply.
Here is what I`m dealing with!!!
Need expert advice on this AFM adjustment seems to be running a little rich. Ciao.
- Attachments
-
- P1000607.jpg (217.01 KiB) Viewed 4088 times
WOOO look at that bling bling!!!
I know Greg Gordon's site has information on how to adjust the AFM to get the mixture right: http://oldebottles.com/italiancars.htm
Should be on page 3, near the bottom.
I know Greg Gordon's site has information on how to adjust the AFM to get the mixture right: http://oldebottles.com/italiancars.htm
Should be on page 3, near the bottom.
Jacob Ricciotti
'81 GTV6 3.0
'81 GTV6 Track car
'91 164S daily driver
'81 GTV6 3.0
'81 GTV6 Track car
'91 164S daily driver