Post Reply
Milano-guy
Silver
Silver
Posts: 8
Joined: Thu Mar 09, 2006 4:21 am

Alfa Romeo Control (loose component)

Post by Milano-guy »

Hello.

I am having trouble with my 75 (milano) 3.0. It doesn't receive charging from the alternator. The alternator is rebuilt and tested so thats not the problem. It also has 0 ohm (contact) between the connector of D+ and on the Alfa Romeo Control.

In pursue of the problem I opened my Alfa Romeo Control unit, which had a loose component inside. It looks like a diode that has to be connected in the right direction.

Image

Can someone look at their AR Control unit and see which way it is supposed to be mounted? It would be very much appreciated. I was thinking of just soldering it back on and hoping the charging problem would be fixed.
Top
User avatar
x-rad
Verde
Verde
Posts: 1223
Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA

Post by x-rad »

Check it first before remounting. This is a fat diode and handles a good amount of current. Possibly overheated and solder melted. May have short somewhere.....
Top
Milano-guy
Silver
Silver
Posts: 8
Joined: Thu Mar 09, 2006 4:21 am

Post by Milano-guy »

x-rad wrote:Check it first before remounting. This is a fat diode and handles a good amount of current. Possibly overheated and solder melted. May have short somewhere.....
Yes, it does seem to handle big currents. Do you think this may have something to do with the charging?

Is there any schematics of the internals of the AR.Control? This may contain information on the direction of the diode.
Top
Post Reply

Return to “Fuel, Electrical & ignition (stock Bosch)”