What fuel pressure gauge setup?
I just picked up a Sears gauge but I think I am looking at some connector 'issues'. Is there an Alfa (GTV6) specific solution?
Jef
85 GTV6 'Gina G2' Shankle cams and headers Resting Serious rebuild in the future
85 GTV6 'Gina G3' Sold but missed.
www.motozane.com
85 GTV6 'Gina G2' Shankle cams and headers Resting Serious rebuild in the future
85 GTV6 'Gina G3' Sold but missed.
www.motozane.com
You can puchase the correct fitting from Granger as an A/C schrader valve. I purchased a pack of 6 many years ago and have tapped them into banjo bolts for temporary use on the Saabs and also on vacuum pumps so I can service auto A/C. You can also surely get them at NAPA.
I used the appropriately sized coupling to bring a brass hose barb together with the schrader valve. I then inserted the hose barb into the cold start injector hose and attached the guage to the other end.
You could also use a "T" if you need the cold start valve.
Note: I never leave the test guage on the car long. I also really keep a fire extinguisher handy.
I used the appropriately sized coupling to bring a brass hose barb together with the schrader valve. I then inserted the hose barb into the cold start injector hose and attached the guage to the other end.
You could also use a "T" if you need the cold start valve.
Note: I never leave the test guage on the car long. I also really keep a fire extinguisher handy.
Scott Shure
Ellicott City, Md
85 GTV-6
Ellicott City, Md
85 GTV-6