I just ordered the Bosch 0 280 120 400 TPS that Jes suggests. The 3 pin Volvo one suggested on the megasquirt forum would not mount without a custom bracket and modifying the TB.
Has anyone figured out the pin configuration on the Bosch 0 280 120 400 TPS ?
AlfaAnthony wrote:Thanks, Jes. Looking at some other posts, I decided to source a 164 throttle body for which a common 3 pin sensor used on Volvo's and Saabs connects to. I found that on the megasquirt area of this site! I'll let everybody know how it goes. Right now on running on MAP but I want to explore!
Thanks!!!!!!
Tony
I also got mine from a 164 which is a measure type not a switch. I will check the part number when I get to the car in the upcoming days.
It fits to the standard layout of the connectors described in the Gotech manual, as I remember but I will check also and post it here.
fastcar
-
- Silver
- Posts: 31
- Joined: Sun Jul 29, 2007 3:03 am
-
- Silver
- Posts: 31
- Joined: Sun Jul 29, 2007 3:03 am
Re: MFI TPS install questions?
I have been trying to make the TPS that Jes suggested work. First of akk mounting is a snap. Bolts up to the Milano throttle body. No need to find a 164 type.
Problem is getting it to work. Car will barely run, won't idle at all. My wideband O2 gauge reads 22.9!
I ve played with the GoTech TPS settings with no success thus far.
Does anyone have a map that uses TPS?
Thanks!
Tony Brucia
Long Island NY
Problem is getting it to work. Car will barely run, won't idle at all. My wideband O2 gauge reads 22.9!
I ve played with the GoTech TPS settings with no success thus far.
Does anyone have a map that uses TPS?
Thanks!
Tony Brucia
Long Island NY
-
- Silver
- Posts: 31
- Joined: Sun Jul 29, 2007 3:03 am
Re: MFI TPS install questions?
I can report some success on my TPS quest. I requested and downloaded Esperan's map (thanks much!). It felt better than the map I was using straight away. I also heard from JJ who sent me instructions on setting up the tps that I had installed.
Sucess running Esperan's map, 50/50 MAP/tps. Car starts better and runs smoother than ever and goes! I wound up taking out a fair bit of fuel from Esperans map which I figure is because I am using Gregs stage 2M injectors.
Thans to the members !
Tony
Sucess running Esperan's map, 50/50 MAP/tps. Car starts better and runs smoother than ever and goes! I wound up taking out a fair bit of fuel from Esperans map which I figure is because I am using Gregs stage 2M injectors.
Thans to the members !
Tony
Re: MFI TPS install questions?
Hi Alfaanthony,
I have posted my map and it uses MAP and TPS. My Alfa is running strong and we are just sorting out the tach, speedo, and other minor electrical stuff.
I have posted my map and it uses MAP and TPS. My Alfa is running strong and we are just sorting out the tach, speedo, and other minor electrical stuff.
-
- Silver
- Posts: 31
- Joined: Sun Jul 29, 2007 3:03 am
Re: MFI TPS install questions?
Found your map and downloaded it. Ren great in my Alfa. Similar to Esperan's.
Thanks
Tony Brucia
Thanks
Tony Brucia