methanol injection...
I'm thinking about going Methanol injection sometime next year...
Would have it come on when a certain boost level is reached, would be great for hot days, especially on the track..
Would be good having that kick in halfway down the qtr!
Anyone here run Meth injection before..?
Would have it come on when a certain boost level is reached, would be great for hot days, especially on the track..
Would be good having that kick in halfway down the qtr!
Anyone here run Meth injection before..?
Selling 1985 GTV6.
Ecu and injectors, lightened.....plays music.
Re: methanol injection...
Garth,
see Greg Gordons writings regarding water methanol injection and knock surpression....IT WORKS
zig
see Greg Gordons writings regarding water methanol injection and knock surpression....IT WORKS
zig
MR1 Zig (I made rate!)
Machinery Repairman USNR
Machinery Repairman USNR
-
- Verde
- Posts: 1552
- Joined: Mon Nov 29, 2004 7:06 pm
Re: methanol injection...
Thanks Zig.
Garth, I have done a huge amount of research on this issue, both academic and practical. Water/Methanol injection is hugely effective at reducing knock, more so than any amount of intercooling, and more than any combination of intercooling and a rich mixture. I think the section on water injection ended up as the largest part of my book on supercharging.
Greg Gordon,
www.hiperformancestore.com
Garth, I have done a huge amount of research on this issue, both academic and practical. Water/Methanol injection is hugely effective at reducing knock, more so than any amount of intercooling, and more than any combination of intercooling and a rich mixture. I think the section on water injection ended up as the largest part of my book on supercharging.
Greg Gordon,
www.hiperformancestore.com
Re: methanol injection...
Aha thats excellent! Thankyou Greg and MR2, thats what i want to hear!!
Although i'm running a knock sensor, the meth inj would be great for the odd 18-20psi dash!! Or the odd sprint around the racetrack...
All i can say is next year the Alfa will be a rocket!!
Although i'm running a knock sensor, the meth inj would be great for the odd 18-20psi dash!! Or the odd sprint around the racetrack...
All i can say is next year the Alfa will be a rocket!!
Selling 1985 GTV6.
Ecu and injectors, lightened.....plays music.
Re: methanol injection...
Garth, are you talking straight methanol injection or water and methanol injection?
Just a little bit of worthwhile info:
Methanol is carcinogenic , absorbs/mixes with water (obviously), has a lovely corrosive effect on aluminium that it is in contact with for any decent length of time (like a tank), and can cause injectors to become clogged.
It would also be illegal (at least as straight methanol) to use on public roads, even in a supplementary roll.
Other than the down sides, the up sides are huge .
Just a little bit of worthwhile info:
Methanol is carcinogenic , absorbs/mixes with water (obviously), has a lovely corrosive effect on aluminium that it is in contact with for any decent length of time (like a tank), and can cause injectors to become clogged.
It would also be illegal (at least as straight methanol) to use on public roads, even in a supplementary roll.
Other than the down sides, the up sides are huge .
-
- Verde
- Posts: 1552
- Joined: Mon Nov 29, 2004 7:06 pm
Re: methanol injection...
There is no practical reason to use straight methanol injection. A water/methanol mix has been proven to be superior.
If you use a pump that's not rated for methanol, it will almost certainly fail if it's in contact with methanol or a water/meth mix. However many systems out there, and all systems from Coolingmist have methanol compatible pumps. The injectors are usually brass, nickel plated steel, or stainless. I have never seen one corrode.
I think these corrosion issues are from people putting systems together with parts from the local plumbing store without a real understanding of what they are doing. If you buy a system from a decent manufacturer and follow the instructions you shouldn't have a problem.
Greg Gordon,
www.hiperformancestore.com
If you use a pump that's not rated for methanol, it will almost certainly fail if it's in contact with methanol or a water/meth mix. However many systems out there, and all systems from Coolingmist have methanol compatible pumps. The injectors are usually brass, nickel plated steel, or stainless. I have never seen one corrode.
I think these corrosion issues are from people putting systems together with parts from the local plumbing store without a real understanding of what they are doing. If you buy a system from a decent manufacturer and follow the instructions you shouldn't have a problem.
Greg Gordon,
www.hiperformancestore.com
Re: methanol injection...
Call me crazy but I think that blue windscreen stuff you get at the auto place can be used just as is. As far as I know the main need for methanol is to keep it from freezing.
the 2nd is if you use a whole lot it might not get all converted to steam and the methanol helps with this. but I would think if only used under boost that would not happen. but if used NA it can.
This is all from memory so take it for what it is worth.
the 2nd is if you use a whole lot it might not get all converted to steam and the methanol helps with this. but I would think if only used under boost that would not happen. but if used NA it can.
This is all from memory so take it for what it is worth.
1987 black Milano Verde
1972 White spider 2000 Veloce
1972 White spider 2000 Veloce
-
- Verde
- Posts: 1552
- Joined: Mon Nov 29, 2004 7:06 pm
Re: methanol injection...
I have a huge section on this exact topic in my book. All the data comes from NACA, and I don't think there is a higher source on this subject. Straight water works very well provided it can't freeze. Water/methanol provides even more knock protection.
Certain windshield washer fluids can be used. Some provide a very good bang for buck. However, some contain additives you don't want. Depending on my needs I use one of two different type of windshield washer fluid. One contains about 40% methanol and one about 25%. The trick is figuring out what each type contains. It's actually pretty easy and explained in my book.
Greg Gordon,
www.hiperformancestore.com
Certain windshield washer fluids can be used. Some provide a very good bang for buck. However, some contain additives you don't want. Depending on my needs I use one of two different type of windshield washer fluid. One contains about 40% methanol and one about 25%. The trick is figuring out what each type contains. It's actually pretty easy and explained in my book.
Greg Gordon,
www.hiperformancestore.com
Re: methanol injection...
Yeah H2o for sure. My mechanic has done before, will great results, guys this isnt coming from an 18yr old, tried and proven methods. Like Greg said, alot of people just put together anything without thinking of material properties.
I would only use it for the track, trust me she dont need it for the street!!
I've just recently had eye surgery on my right eye, so havent driven my baby in over a month...so delay with more footage...
I would only use it for the track, trust me she dont need it for the street!!
I've just recently had eye surgery on my right eye, so havent driven my baby in over a month...so delay with more footage...
Selling 1985 GTV6.
Ecu and injectors, lightened.....plays music.
-
- Verde
- Posts: 1552
- Joined: Mon Nov 29, 2004 7:06 pm
Re: methanol injection...
Hi Garth,
Best of luck recovering from surgery. I would use it on the street too, it's cheap insurance. The cost of water from a tap with a filter on it is so low it just makes sense to use the system all the time.
Greg
Best of luck recovering from surgery. I would use it on the street too, it's cheap insurance. The cost of water from a tap with a filter on it is so low it just makes sense to use the system all the time.
Greg
Re: methanol injection...
The Alfa 155 Q4 had a water injection system fitted as standard so why not, it was never designed to run on the track.Greg Gordon wrote:Hi Garth,
Best of luck recovering from surgery. I would use it on the street too, it's cheap insurance. The cost of water from a tap with a filter on it is so low it just makes sense to use the system all the time.
Greg
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-
GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-
GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
-
- Verde
- Posts: 1552
- Joined: Mon Nov 29, 2004 7:06 pm
Re: methanol injection...
At least one type of Saab had it as well. I didn't know Alfa used it, I learn something new here all the time.
Greg
Greg
Re: methanol injection...
Thanks Greg, yeah your right, all the time would be better, and would only come on at high boost..
Selling 1985 GTV6.
Ecu and injectors, lightened.....plays music.