Re: xrad's gtv6
It might have a slight frown. I may cut a groove on top and reweld it.
Once the whole car is painted white, It will not stick out as much....
Bumpers off a 69 camaro or something from that era... 200$ for front and rear.
Once the whole car is painted white, It will not stick out as much....
Bumpers off a 69 camaro or something from that era... 200$ for front and rear.
Re: xrad's gtv6
Wow OKP parts shipped from Germany and arrived in 4 days!!
Now i have an assortment of shims and a new set of friction discs (see pic)
Wife says 'she is tired of seeing this piece of shit in the driveway' So I take it she means bring it to a body shop! As Good as saying 'OK..spend 6000$' in my book!!!
Rebuilt steering rack. No play at all. rack very nice shape (thanks Krazyman ebay)..new boots, new grease... all plastic covers and rubber like new (with a little silicone treatment) I could not find a ~32mm crow's foot locally, so I ground down a 1 1/4 in wrench...worked fine.
I can see that if you leave the stabilizer off, you can use driver side boot on both sides (IAP has both bellows, however, the passenger side one is very cheap chinese rubber, driver side is very well made. I kept the original Alfa piece just in case..)
I measured the inner tie rods..passenger side is ~1cm longer including the spacer the holds the boot. You may be able to get away with just two of the driver side inner tie rods???? I say this because it seems the passenger side is NLA....
Now i have an assortment of shims and a new set of friction discs (see pic)
Wife says 'she is tired of seeing this piece of shit in the driveway' So I take it she means bring it to a body shop! As Good as saying 'OK..spend 6000$' in my book!!!
Rebuilt steering rack. No play at all. rack very nice shape (thanks Krazyman ebay)..new boots, new grease... all plastic covers and rubber like new (with a little silicone treatment) I could not find a ~32mm crow's foot locally, so I ground down a 1 1/4 in wrench...worked fine.
I can see that if you leave the stabilizer off, you can use driver side boot on both sides (IAP has both bellows, however, the passenger side one is very cheap chinese rubber, driver side is very well made. I kept the original Alfa piece just in case..)
I measured the inner tie rods..passenger side is ~1cm longer including the spacer the holds the boot. You may be able to get away with just two of the driver side inner tie rods???? I say this because it seems the passenger side is NLA....
- Attachments
-
- IMG_5049.JPG (97.26 KiB) Viewed 6761 times
-
- IMG_5045.JPG (62.26 KiB) Viewed 6758 times
Re: xrad's gtv6
Xrad,
WTF are you doing with that damper on the steering rack ?? !!!
That crap is only fitted to four wheek drive vehicles that are doing serious off road work like chasing sheep in paddocks. The thing is there to protect your wrist from breaking off when you suddenly hit a rock and the steering wheel gets a huge kick around unexpectedly.
If this was necessary, they would fit it around the world and on all cars like headlights. Piss it off. Its affecting your steering response.
WTF are you doing with that damper on the steering rack ?? !!!
That crap is only fitted to four wheek drive vehicles that are doing serious off road work like chasing sheep in paddocks. The thing is there to protect your wrist from breaking off when you suddenly hit a rock and the steering wheel gets a huge kick around unexpectedly.
If this was necessary, they would fit it around the world and on all cars like headlights. Piss it off. Its affecting your steering response.
Transaxle Alfas Haul More Arse
- Giuliettaevo2
- Verde
- Posts: 790
- Joined: Sun May 08, 2005 11:56 pm
- Location: Netherlands
Re: xrad's gtv6
My bmw E30 had the same shock absorber thingy... never seen it on any of my 75's without PS however.
Drive it like you stole it...
Re: xrad's gtv6
My guess it was originally destined for the Yank market. It's just useless dead weight.
Transaxle Alfas Haul More Arse
Re: xrad's gtv6
Finally we agree on something...MD wrote:Xrad,
WTF are you doing with that damper on the steering rack ?? !!!
That crap is only fitted to four wheek drive vehicles that are doing serious off road work like chasing sheep in paddocks. The thing is there to protect your wrist from breaking off when you suddenly hit a rock and the steering wheel gets a huge kick around unexpectedly.
If this was necessary, they would fit it around the world and on all cars like headlights. Piss it off. Its affecting your steering response.
I think you're holding back a bit though.
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-
GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-
GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
Re: xrad's gtv6
Ha ha. It's only taken 1739 posts !!
Don't want to be too hard on him just a small kick up the butt will do. That's cause I like the guy. He is a real doer and tries real hard to get to where he wants his car to be. Whether others agree with some steps or not is not relevant. Can't put a guy down for that.
The crap they put on cars destined for the US market is sometimes just unbelievable.
Don't want to be too hard on him just a small kick up the butt will do. That's cause I like the guy. He is a real doer and tries real hard to get to where he wants his car to be. Whether others agree with some steps or not is not relevant. Can't put a guy down for that.
The crap they put on cars destined for the US market is sometimes just unbelievable.
Transaxle Alfas Haul More Arse
Re: xrad's gtv6
Amen!
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-
GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-
GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
Re: xrad's gtv6
Oh my god, you guys are such sukers...Of course I put this pic in here JUST FOR YOU...I already know all about MAts and MD's thought on the freekin steering shock...BUT what you guys don't understand is that I drive with my d*ck, and I don;t want it 'snapped off'
Here is a pic of the REAL RACK..See..no shock!!!
Here is a pic of the REAL RACK..See..no shock!!!
- Attachments
-
- real rack.JPG (84.59 KiB) Viewed 6589 times
Re: xrad's gtv6
proud new owner of probably the last MINT front grill
Re: xrad's gtv6
Hey Dinky dik. I think I can see a shock absorber behind that grill.
That grilla looks great mate.
That grilla looks great mate.
Transaxle Alfas Haul More Arse
Re: xrad's gtv6
Why is it not chrome? You know what they say right? If you can't....uh...if you can't....hmmm...just chrome it.
Dr. Alban
Re: xrad's gtv6
Yeah Zeefa, I'm with you. We want chrome. We want chrome. We want chrome.
(er.. preferably with an impact absorbing shock absorber behind it for those nasty little bumps that might put a dint in your doodle)
(er.. preferably with an impact absorbing shock absorber behind it for those nasty little bumps that might put a dint in your doodle)
Transaxle Alfas Haul More Arse
Re: xrad's gtv6
My God! You guys LOVE chrome!! whatever....
Look closely at the rack..I just photochopped out the strut!!HAHAHAHAH
Look closely at the rack..I just photochopped out the strut!!HAHAHAHAH
Re: xrad's gtv6
Speaking about the steering shocks I heard that the 164 with big engines benefit from it. Else it tries to pull the arms off. Didn't try my self. We removed it from my fathers 164 TS and it's at least not worse than before.