Jim has offered to give me good advice when the flow numbers come in, but I would like to get a head start and know what I'm trying to talk about

He stated he could do a regrind of both original TS cams and could come up with (the red profile)Micke wrote:Dennis. You might want to ask this guy.
http://www.alfaromeo-nockenwellen.de/a4zyl.htm
hmmmm, that is a tough one.6.5mm lift at TDC
Aaaaah, now that's an answer I can do something with!! I'm not so tough once you get to know meJimGreek wrote:Boy, Dennis, you sure are a tough customer! I think the Catcams 1030206 is an excellent profile for a Godzilla engine. Just make sure your engine builder can accommodate 6.5mm lift at TDC, which isn't easy at all when going for high CR. You'll need some very clever piston design.
muhahhahahaJimGreek wrote:With a 126-130cfm head (very difficult) and good large headers, you'll get lot more than 200hp at ~7.5-8krpm. Now 24kgm....I don't know about that!
Jim K.